The Oculus Quest 2 controllers use single AA batteries and can drain quickly. You’ll need to change them out with new ones if they run low.

It’s easy to replace the batteries, but getting the battery cover open can be tricky. This guide will show you how to do it step-by-step.

1. Remove the Battery Cover

The Oculus Quest 2 controllers don’t run on built-in batteries and instead rely on AA cells that you can use either disposable or rechargeable. If you find yourself needing to charge your controllers more frequently than usual, it’s probably time to replace them.

This process is quite simple and shouldn’t take much more than a few minutes, but it’s important to follow the directions carefully. If you don’t, it’s possible that you’ll ruin your new batteries or damage the Oculus Quest 2 controller in the process.

First, you’ll need to purchase a few single AA batteries. You can use both disposable and rechargeable batteries for the Oculus Quest 2 controllers, but it’s important to make sure that you’re using alkaline AA batteries (the kind you typically see in most appliances).

Next, you’ll need to locate the battery compartment. It’s tucked away in the grip of each controller, indicated by a small eject icon or arrow. For some users, this might be a little difficult to find at first.

You can use a butter knife or other kitchen utensil to help you remove the battery cover. While this isn’t required, it may make the process easier for some. Be careful not to apply too much force, as you could break the plastic cover.

Once you’ve removed the battery cover, slide it downwards to reveal the AA battery compartment. You can then insert a new battery into the holder and replace the cover. Once you’ve done this, you’re ready to start enjoying your Oculus Quest 2 controllers again!

Once you’re finished replacing the batteries, remember to slide the lanyard string downward so that it’s sitting in the lanyard cutout on the bottom of the controller. This will ensure that the string doesn’t obstruct the magnetic battery door cover you removed in step one. Finally, be sure to slide the lanyard back into place until it clicks and sits flush against the controller.

2. Open the Battery Compartment

There’s nothing worse than running out of batteries while playing a VR game. Luckily, the Oculus Quest 2 controllers have a built-in battery compartment to house a single AA battery for power. Whether you’re playing Demeo in virtual reality or killing zombies with friends in After the Fall, it’s important to keep an eye on your controllers’ battery levels and change them as needed.

The battery compartment in the oculus controller is tucked away under the palm grip and indicated by a small eject symbol. You’ll need to hold the controller with the eject symbol pointing upwards and push it gently to open it. Once you’ve done that, you can remove the old battery and replace it with a new one while the cover is off.

While the plastic cover may be stiff at first, once you’ve gotten the hang of it, removing it should be fairly easy. Just be careful not to use too much force, as this could break the cover.

If you’re using rechargeable batteries, be sure to take note of the positive and negative ends of each one. The positive end of the battery should be pointed towards the bottom of the controller grip, while the negative end is pointed towards the top of the ring on the back of the controller. This way, you’ll know which side of the battery to insert when you’re replacing it.

Once you’ve removed the cover, you should see a plastic flap with a small eject icon that you need to slide away from you and up to reveal the battery compartment. Inside the compartment is a single AA alkaline battery, which you can replace with disposable or rechargeable batteries as desired.

If you’re using rechargeable batteries, make sure to put them in correctly and charge them as directed to ensure they stay charged for longer periods of time. It’s also a good idea to check the batteries regularly, as they can lose their charge over time due to the environment and usage. If your rechargeable batteries are starting to get low, consider getting a battery charging station to store them and charge them when necessary.

3. Remove the Battery

The oculus controllers have batteries that can last quite a long time, but from time to time they will need to be replaced. It can be frustrating to run out of battery power midway through a gaming session, so it is important to check the battery level regularly and learn how to change the batteries in oculus controllers.

To change the battery in the oculus controllers, first you need to remove the plastic cover. This is easy enough for most people, but it can be a bit tricky for those with slim fingers or weak hands. Be careful not to apply too much pressure, as the plastic cover could break.

Once the cover is removed, you can open the battery compartment. This is located on the bottom of the controller, underneath the grip button. It is indicated by an eject icon, and can be opened by sliding the cover upwards with a little pressure. The positive end of the battery should have a little nub on top, and there should be + and – signs on each side to indicate which way is positive and negative.

Next, insert the new battery and slide the cover back into place. Make sure to use alkaline batteries, and not rechargeable ones. Alkaline batteries can provide power for up to 10 years, and they will not lose their charge as quickly as rechargeable batteries. Using rechargeable batteries is also good for the environment, and it can save you money in the long run.

Finally, if you are still having trouble with opening the battery compartment, it may be helpful to use a butter knife or other kitchen utensil to help you. Just be sure to dispose of the old batteries in a proper battery receptacle to avoid environmental damage. With these tips, you will be able to keep your oculus controllers running for a long time without the need to replace them. So, give them a try and see how you like them! They are sure to provide a great virtual reality experience. Happy gaming!

4. Replace the Battery

Experienced gamers understand that a power shortage is one of the worst things that can happen during an immersive gaming session. A low battery notification is a sign that it is time to replace the controller’s batteries, and it is easy enough to do so in most cases. In order to keep the VR experience going smoothly, you should always have a fresh set of AA alkaline batteries on hand, and it is a good idea to check the level of those batteries on a regular basis so that they don’t run out during a gaming session.

Changing the Oculus Quest 2 battery can be tricky, as the battery compartment is tucked away in the palm grip of each controller. The opening to this battery compartment is marked by a small eject symbol, which can be difficult to spot for some users, especially if they are not familiar with the layout of the controllers. Once you have located this eject symbol, you can slide the cover upwards with a little bit of pressure to access the battery compartment.

Once you have removed the cover from the battery compartment, you can easily swap in a new AA alkaline battery. You can also opt to use rechargeable AA batteries, which are available in most stores, and can be charged in a compatible battery charger. This can save you money in the long term, and will reduce your environmental impact.

Once you have replaced the battery, close the cover and test out your controllers to ensure that they are working properly. If you are still experiencing issues with your Oculus Quest 2, it is possible that the batteries simply need to be replaced, so it may be worth trying this before contacting the Oculus support team for further assistance. Often, just removing and reinserting the battery can fix many common problems with Oculus Quest 2 controllers, so you should be able to get back to your gaming sessions shortly. If you do not have any luck with this, it is always a good idea to contact the Oculus support team for further assistance.